Fire Isolator EV Car Fire Aerosol Units - Salt Potassium Fire Extinguishing Pods - Lightweight, Handheld Device for Fire Suppression - FI-AUCA-1

The danger of lithium-ion batteries, such as those found in smartphones and electric vehicles (EVs), catching fire or exploding is well known. While the actual consequences of an EV battery catching fire and the dangers that these fires can cause are well known, it remains very difficult to control and extinguish these fires.

Imagine if this happened on the parking deck of a ferry or in an underground parking garage. The consequences could be catastrophic. The methods of extinguishing a fire in a lithium-ion battery depend on the location and extent of the fire. However, as a general rule, special extinguishing equipments and methods are required to completely and safely extinguish or isolate the fire. By using multiple ways and materials of EV car firefighting, you increase the chances of safely isolating the fire by 500%.

The Aerosol Salt Potassium Unit is a lightweight, handheld device for the first responder in a fire situation, primarily for Class A, B, and C fires. The purpose of the Aerosol Salt Potassium Unit is to allow the first responder on scene to activate it and throw it into the fire area. The device will then automatically activate and, depending on the volume of the space, extinguish or significantly reduce the fire. It is designed to cause a reduction in heat and also the amount of water or foam required and possibly reduce damage to the area and or contents, while leaving little or no residue.

Key Features & Equipment Benefits:

• Lightweight Handheld Device: Easy to handle and deploy during fire emergencies.
• Designed for Class A, B, and C Fires: Versatile application across different fire types.
• Activates Automatically Upon Deployment: Minimises response time and enhances firefighting efficiency.
• Reduces Heat and Minimises Water or Foam Usage: Limits fire damage and residue, preserving property and contents.
• Rapid Dispersal Within 40 seconds: Swiftly controls fire spread and intensity.
• Long Hold Time of 30 minutes: Provides extended fire suppression capability after activation.
• SNAP Listing by EPA: Ensures compliance with environmental safety standards.
• Ecologically Safe and Environmentally Friendly: Reduces environmental impact during use and disposal.
• Serviceable lifetime of 15 years: Ensures long-term reliability and cost-effectiveness.
• Storage Between +5°C / +40°C: Suitable for a wide range of storage conditions, ensuring readiness in varying environments.
• Delivered in Heavy-Duty Case: Facilitates safe storage and transport, enhancing accessibility during emergencies.

How to activate:

• Straighten the end of the pins and pull the pin out.
• Once the pins have been removed you will hear a click, this notifies the user that the uint is now activated and will start producing aerosol in a approximately  6 to 8 seconds.
• Within 40 seconds, the contents of the aerosol will be fully dispersed. 

Notes:

• Always throw the unit into the chosen area without hesitation!
• Keep a safe distance considering the temperature build-up around the unit
• Only to be used by trained persons
• Discounts are available on quantities of 5+ units, please contact us here to enquire. 

Technical Information:

• Width: 405 mm
  
• Height: 135 mm
  
• Weight: 6.3 kg
  
• Volume coverage: Up to 45 m3 (1400 ft3)
  
• Hold time: Average 30 minutes, varies based on volume (in m3)
  
• Storage conditions: Between +5°C to +40°C, maximum humidity 80%
  
• Serviceable lifetime: 15 years
•  Storage between +5°C / +40°C max. humidity 80%
  
• Volume coverage: up to 45M3 (1400ft3
  
• Does not deplete oxygen levels
  
• SNAP listing by EPA
  
• Ecologically safe and environmentally friendly
  (O.D.P.=0, G.W.P.=0)