Fire Isolator Water Mist Lance - Electric Vehicle Fire Control
Water Mist Lance & Penetration Hammer are designed to meet the requirements in SOLAS regulations II-2/10.7.3 for extinguishing fires inside confined spaces, such as fires in containers
FIRE ISOLATOR - WATER MIST LANCE
The danger of lithium-ion batteries, such as those found in smartphones and electric vehicles (EVs), catching fire or exploding is well known. While the actual consequences of an EV battery catching fire and the dangers that these fires can cause are well known, it remains very difficult to control and extinguish these fires.
Imagine if this happened on the parking deck of a ferry or in an underground parking garage. The consequences could be catastrophic. The methods of extinguishing a fire in a lithium-ion battery depend on the location and extent of the fire. However, as a general rule, special extinguishing equipments and methods are required to completely and safely extinguish or isolate the fire.
By using multiple ways and materials of EV car firefighting, you increase the chances of safely isolating the fire by 500%.
The Water Mist Lance & Penetration Hammer is designed to meet the requirements in SOLAS regulations II-2/10.7.3 for extinguishing fires inside confined spaces, such as fires in containers.
According to this regulation, vessels built on or after January 1, 2016, and designed to carry containers on or above the weather deck, must carry at least one water mist lance.
This model is not only suitable for controlling fires within a container, it has also been made suitable to flood EV car Lithium batteries.
The Water Mist Lance is made of stainless steel and the top shaft was PE-coated to prevent Electric shock. When connected to water supply, the lance will produce a water mist inside the container.
The shaft is variable in length from 500mm up to max 1350mm.
According to the regulations, vessels built on or after January 1, 2016, and designed to carry containers on or above the weather deck, must carry at least one water mist lance.
Discounts are available on quantities of 5+ units, please contact us here to enquire.
Need any help? Get in touch with an expert via the contact form below.
SKU No. - 40020420
Dimensions - 30cm (W) - 135cm (H) x 2.2 cm (D)
Lifespan - 10 Years
Weight - 5.5Kg
Lance Material - Shaft SS 304, Top PE Coated
Nozzle : SS 316
Ball Valve :Stainless Steel
Drill Size : 19mm, 77mm depth
Lenght of impact Hammar - 478mm - 2.5Kg
Nominal Pressure & Flow : 90L/min @ 8Bar
Temperature - Tested tp + 1600 °C
ABS approval pending
MANUFACTURERS & DISTRIBUTORS OF SPECIALIST SAFETY EQUIPMENT
Latest News Articles
Posted: August 24, 2022Fast Inflation Shelter Series: Search & Rescue
Search & Rescue Rapid Deployment Air Shelter - a range of accessories available for faster air inflation output and speed rescue & recovery
Posted: August 19, 2022Fast Inflation Shelter Series: 'Pop Up' Medical Tents
Fast Inflation Emergency Air Shelters for rapid deployment - Browse the full range of inflatable tents, with accessories available!
Posted: August 08, 2022SB Rescue Sling & MOB Vertical Recovery (What you need to know!)
The SB Rescue Sling: MOB & Body Recovery System ((MCA & SOLAS accepted) for vertical recovery with rapid rescue - Full range of SB Rescue Sling & Accessories available!
Posted: July 28, 2022Official 2022 Distributors of the Jason's Cradle MOB System!
I.C Brindle are now official partners with Jason's Cradle! Distributing the full range of the world's leading MOB recovery system - at retail and discounted prices.